40W LED Flat Panel Lighting 30 x 120MM,only 13.5mm thickness with soft light.
Description:
1. Bellaid flat LED panel light is a well- Designed for residential
and commercial conventional suspended grid ceilings for new
construction applications or retrofitting existing fluorescent
troffer light fixtures.widely used in offices,hospitals and other
professional locales.
2. Huge savings can be achieved along with a significant reduction
in maintenance costs making them perfect for use in Offices,
Hospitals, Care Homes and Commercial installations.
3. It's equally just as good in your home - especially if you are
unable to have recessed lighting installed. Panel lighting is also
being widely used by designers for Light Installations or Back
Lighting.
4. This 295x595mm LED Panel light is designed to fit into a
suspended ceiling with a 300x1200mm grid dimension. In this type of
installation, the typical application for this LED Panel would be
for it to replace a 300x1200 trough of 2 x 1200mm (2ft) T8/T5
Fluorescent tubes .
5. It also has the versatility to be surfaced mounted onto any flat
surface such as an internal wall or ceiling.
6. Great source of illumination delivering up to 4000 Lumens with a
fantastic 120 Degree Beam Angle using an Anti-Glare frosted lens to
diffuse the light and with a White Frame finish.
Product Specifications:
Construction & materials:
Actual Dimension | 295*595mm(11.6*23.43inch) |
Housing | Extrusion aluminum and Diffused PMMA optical lens. |
Finish color | White and silver |
Lens type | Frosted |
Retrofit | Yes |
Environmental system
Work environment | Indoor use ( application for dry environment) |
Operating temperature | -20～50℃ |
Mercury (mg) | 0 |
Optical system
Luminous flux | 3800lm @ 4000K, 4000lm @ 6000K |
Color temperature | 4000K & 6000K is best seller. |
CRI | 82 for 4000K, 83 for 6000K |
Spacing criteria | C0/180:1.26;C90/270:1.23 |
Lumen maintence at 6000h | 95% |
Lumen Maintenance Factor at Lifetime | 0.75 |
Rated peak candelas(cd) | 4000K @ 1300; 6000K @ 1450 |
Emergency Luminous Flux (lm) | 1200LM @ 1/3 wattage |
Electrical system
Input voltage/Current | 100-2770Vac;220-240Vac,50/60Hz |
Off state power | 0 |
Power consumption | 40W |
Power Factor | 0.98 |
THD | ＜15% |
Protection | Class II driver, Class III panel IP20 real/IP40 front |
Dimmable | No |
Switching Cycles | 50000 |
Start Time (s) | 0.35 |
Warm-up time to 60% (s) | Instant full light |
Features
Save up to 60% energy usage compared to traditional fluorescent
fittings.
Optional built in, surface and suspension mounting kits available.
Class II
High Lumen output
Long life of 40,000h
Slim profile design
Instant start
Negligible UV output
Mercury free
Photometric Information
4000K 6000K
Distribution curve flux:
Illuminance demo:
User Guide Note:
Pls read the entire manual to fully understand and safe usely use
this product.
The products anc be used at voltage of 100-277Vac,50/60Hz,suitable
for indoor dry environment.
Specifications are subject to change without notice.pls visit
www.LED-Panel-lights.com for the most recent user guide versions.
Unpacking
- Unpack and careful examine the product.
- Report any damage and save all packing material if any parts were
damaged during transportation
- Do not attempt to use this apparatus if it is damaged.
Installation instructions
1) Pls remove the protection film on the front of luminaire
- Consult a qualified electrician to ensure correct branch circuit
conductor.
- The products should be installed and operated by qualified
electrician or technician in accordance
- with relevant local codes.
- Rish of electric shock,ensure that main power source is off when
wiring or soldering the sections of
- the product.
Maintenance
- Prior to cleaning the product,make sure it has been disconnected
from power supply.
- Use a dry or slightly moistened cloth for cleaning
- Never use any chemical or abrasive materials for cleaning.
Installation considerations
- The product must be at a minimum distance of 20cm from any
flammable material.
- The product must not be installed into ceilings or wall that
contain heat-insulating materials.
Installation steps
- Turn off main power before wring.
- Remove the ceiling panel
- Connect the input and ground wires(bare end) of the driver box to
the main power outlet.
- Connect male-female connector tightly on the panel and driver.
- Fix the flat led panel into the ceiling.
